2 Flute TAPERED Ball Nose Carbide Mill (for 3D Carving)

$AU16.50
TP-2F
In stock
+

The most versatile bit you need to have in your set is the tapered ball nose. Capable of engraving wood, plastics, soft metals and even steel, these are a high quality bit and withstand a beating even with a R0.25mm tip. Some uses of this bit include cutting PCB tracks, engraving lettering in ABS or even steel plates, 3D carving of aluminium or brass and much more.

Suitable for

  • Plastics (ABS, acrylic, HPDE etc.)
  • Wood
  • Steel
  • Soft Metals (use an appropriate coolant)
  • Ferrous metals (use an appropriate lubricant)

Adam’s Tips

Avoid a deep depth of cut to improve the finish of your material and increase the feed rate to make up for lost time. Also, use a coolant when cutting soft metals and lubricant when cutting ferrous metals to ensure the cleanest finish.

 

Description Shank Radius Cutting Length Angle
R0.25mm x 3.175mm x 15mm  2F 3.175 R0.25 15 5
R0.5mm x 3.175mm x 15mm  2F 3.175 R0.5 15 4.2
R0.75mm x 3.175mm x 15mm  2F 3.175 R0.75 15 3.2
R1.0mm x 3.175mm x 15mm  2F 3.175 R1.0 15 2.2
R0.25mm x 6mm x 20mm  2F 6 R0.25 20 7.8
R0.5mm x 6mm x 20mm  2F 6 R0.5 20 7.1
R0.75mm x 6mm x 20mm  2F 6 R0.75 20 6.4
R1mm x 6mm x 20mm  2F 6 R1 20 5.7
R1.5mm x 6mm x 20mm  2F 6 R1.5 20 4.3
R2mm x 6mm x 20mm  2F 6 R2 20 2.9
R0.25mm x 6mm x 30.5mm  2F 6 R0.25 30.5 5.2
R0.5mm x 6mm x 30.5mm  2F 6 R0.5 30.5 4.7
R0.75mm x 6mm x 30.5mm  2F 6 R0.75 30.5 4.2
R1.0mm x 6mm x 30.5mm  2F 6 R1.0 30.5 3.8
R1.5mm x 6mm x 30.5mm  2F 6 R1.5 30.5 2.8
R2.0mm x 6mm x 30.5mm  2F 6 R2.0 30.5 1.9