CNC- Accessories

Sort by Position: Low to High
48 Per Page
4 th Axis Rotary table with three-jaw chuck
$AU899.00
With this round table, you can easily engrave rings, thread milling, etc. - Secure workpiece holder with steel three-jaw chuck. - Zero point defined...
In stock
+ −
Hot-knife for Step Craft CNC-/3D-Systeme
$AU229.00
The hot-cutter  for the STEPCRAFT 300 or 420. The tool enables precise cutting of all materials like styrofoam, expandable polystyrene (EPS) or...
In stock
+ −
Drag Knife holder (Cutting depth adjustable)
$AU239.00
Here you get a knife holder for CNC machines with unique automatic pressure regulation of high-quality aluminum.  Details: - Kniffe holder (Cutting...
In stock
+ −
Stepcraft CNC Pen
$AU99.00
Small CNC writer for the 20mm clamping device Included 1 x Stainless steel mine black
In stock
+ −
Stepcraft Mini Engraving point
$AU29.00
The Tungsten Carbide Tip is designed for the use with the Mini Engraving Point and is easily inserted and secured.   Tungsten carbide is created from...
In stock
+ −
Adaptor Proxxon Drill Press To Dremel. Ryobi, Ozito
$AU29.00
Adapter from 20 mm clamping diameter to Dremel,Ryobi and Ozito Tool adapter for our CNC-/3D-Systems: Ø 20 mm to M19x2 thread (Dremel).
In stock
+ −
Tool adapter from Ø 20 mm to Ø 8 mm for mini tools
$AU19.95
Tool adapter for our CNC-/3D-systems: From Ø 20 mm to Ø 8 mm to use with CNC pen Vario or the engraving point.
In stock
+ −
Save 6%
Tool adapter from Ø 43 mm to M19x2 mm thread (Dremel)
$AU39.99 $AU37.50
Tool adapter for our CNC-/3D-Systems: Diameter Ø 43 mm to M19x2 mm thread (Dremel).
In stock
+ −
Tool adapter from Ø 43 mm to Ø 20mm (Proxxon)
$AU39.00
Tool adapter for our CNC-/3D-system: Diameter Ø 43 mm to Ø 20mm (Proxxon).
In stock
+ −
Proxxon Precision steel vice PM 40
$AU95.00
Milled from steel for precision. Completely angular. Jaw width 46mm, clamping capacity 34mm. Total length 70mm. Especially suited for filigree and accurate...
In stock
+ −
Quick Release Lever
$AU16.99
The clamping lever with disengaging knob is a suggestion of improvement of one of our customers. The lever is very goog suitable for quick release of the...
In stock
+ −
Save 20%
T-Slot Machine Table for D600
$AU999.00 $AU799.00
The machine table from aluminium for your STEPCRAFT! The t-slot plate is made of low-tension aluminium and is well-suited for clamping workpieces of...
In stock
+ −
UC100 USB motion controller
$AU199.00
Replaces the LPT port. - Controls upto 6-axis simulteneously. - Works with Mach3 software via plugin. - Upto 100kHz operation. - USB connection...
In stock
+ −
Adapter 90 degree clamping 20mm
$AU69.00
Tool adapter for our CNC-/3D-system: With the aid of the adapter larger workpieces can be processed from the side. Diameter Ø 43 mm to Ø 20mm...
In stock
+ −
ER11 collets
$AU16.99
You Choose what size you need ( 1 COLLET = $16.99 EACH ) 3.0mm,4.0mm,6.0mm,,8mm  1/8", 1/4" if you choose to buy the set...
In stock
Select options
Parallel-Module
$AU49.00
Parallel-module to connect the mainboard of the STEPCRAFT 300 / 420 / 600 to a parallel interface (LPT1) of your computer.
In stock
+ −
STEPCRAFT 4th axis module
$AU189.00
The module is necessary to control a rotary axis with the STEPCRAFT machine. The module is simply plugged into the main control unit and can be used for...
In stock
+ −
Tailstock suitable for rotary table
$AU189.00
Tailstock, specially designed for circular-table, Complete with all screws. Technical data: - peak hight: 32 mm - total height: 45 mm - screw...
In stock
+ −
Save 10%
STEPCRAFT T-Slot Machine Table for S300
$AU499.00 $AU449.00
The machine table from aluminium for your STEPCRAFT! The t-slot plate is made of low-tension aluminium and is well-suited for clamping workpieces of...
In stock
+ −
Save 12%
T-Slot Machine Table for D420
$AU679.00 $AU599.00
The machine table from aluminium for your STEPCRAFT! The t-slot plate is made of low-tension aluminium and is well-suited for clamping workpieces of...
In stock
+ −
Tool adapter from Ø 43 mm to Ø 33 mm
$AU39.00
Tool adapter for our CNC-/3D-systems: Ø 43 mm to Ø 33 mm.
In stock
+ −
20mm CNC Guide Support
$AU7.99
 to mount your Dremel all you need to add is one of these 
In stock
+ −
Precision vise, large (suit PF/FF 230, PF/FF 400)
$AU146.00
Milled from steel, this high accuracy vise may be used on its side or on its back. Technical specifications 60mm jaw width 44mm maximum clamping capacity...
In stock
+ −
Free shipping
UCCNC software license (key!)
$AU99.00
UCCNC is a machine control software. It uses and external hardware to generate signals to produce coordinated motion on up to 6 machine axis. The external...
In stock
+ −
Heating Bed 200 x 200mm
$AU379.00
The heating bed makes 3D print much easier and more accurate. It reduces the temperature between the filament and the bed and, which provides a better adhesion. Additionally, the heating bed is height-adjustable so that you will always have a plane surface.
In stock
+ −
Woodburning Pen
$AU179.00
The woodburning pen enables you to easily engrave wood by burning amazing designs into the material. The device heats up to 550°C and offers various tips...
In stock
+ −
Spindle Mount 69mm for DeWalt
$AU59.00
This spindle mount is more stable and capable for spindles and routers with a 69 mm collar like the DeWalt DW610.
In stock
+ −
Tool holder for automatic tool changer
$AU69.00
The tool holders have a high concentricity due to the direct clamping system. They are made of stainless steel and available in the shaft diameters of...
In stock
Select options
MICROLUBE GL 261 Kleber (Grease)
$AU9.99
c Klüber is a special grease based on mineral oil with a special lithium soap . It contains the active ingredient combination MICROLUBE . This causes a...
In stock
+ −
Set of 6 Tee Nuts for Stepcraft , MF 70 - KT 70 - GE 70 - GE 20 - MF 70/CNC
$AU11.99
Set of six steel tee nuts compatible with the tee slots of the below Stepcraft and Proxxon™ devices: Stepcraft T-slot Tables MF 70 mill # 27110...
In stock
+ −
Stepcraft Milling bath 420 (150 x 350 mm)
$AU299.00
When using the Milling Bath you can machine various materials under water or other liquids. Thus, you do not only achieve a very good cooling, which is...
In stock
+ −
Stepcraft Milling bath 600 (350 x 550 mm)
$AU429.00
When using the Milling Bath you can machine various materials under water or other liquids. Thus, you do not only achieve a very good cooling, which is...
In stock
+ −
Stepcraft Milling bath 840 (550 x 700 mm)
$AU569.00
When using the Milling Bath you can machine various materials under water or other liquids. Thus, you do not only achieve a very good cooling, which is...
In stock
+ −
Save 8%
Clamping Nut (spare part) for HF spindle
$AU19.50 $AU17.95
Clamping nut (spare part) for STEPCRAFT HF-spindle 350 / 500 W with diameters from 1 mm to 8 mm
In stock
+ −
Save 13%
T-Slot Machine Table for D840
$AU1,499.00 $AU1,299.00
The aluminum machine table for your STEPCRAFT 2 series! The T-Slot Machine Table is made of low-tension aluminium and is well-suited for clamping workpieces...
In stock
+ −
Proxxon Step clamp set, small
$AU41.50
This set contains two stepped blocks and clamps, (11.5mm x 11mm x 4mm) Included components 2 x stepped blocks 2 x clamps 2 x T-slot nuts 2 x...
In stock
+ −
Proxxon , Stepcraft Clamping Set
$AU129.00
Flexible clamping when working with thick materials Suitable for workpieces with a thickness of up to 80 mm System based on M6 threads Clamping...
In stock
+ −
Save 6%
3D Touch Probe
$AU529.00 $AU499.00
  The Touch Probe device was designed to expand the capabilities of the Stepcraft CNC System by allowing you to be able to precisely locate starting...
In stock
+ −
Save 23%
Suspended workpiece holder
$AU129.00 $AU99.00
The Clamping Set enhances your flexibility when securing your workpiece to the T-slot machine table of your Desktop 3D System. Due to the step blocks,...
In stock
+ −
Laser Engraving Head DL445 3 Watt
$AU1,449.00
Some jobs are best suited for a laser rather than a rotary tool.  The new Stepcraft Laser Engraving Head allows for a contactless cutting cutting of light...
In stock
+ −
Save 11%
(915mm) Double T-slot Track
$AU28.00 $AU25.00
Veritas' double T-Slot tracks are the perfect jig-making alternative when you cannot install a regular extrusion using glue or screws. Available in 2'...
In stock
+ −
LED-Illumination
$AU119.00
The machine illumination is an indispensable auxiliary tool when you want to operate safely and precisely. For this purpose, the self-adhesive LED strip is...
In stock
+ −
3pin Mains Plug to IEC C13 Female - 1.8m
$AU8.99
• 1.8 metres long • Earthed • SAA approved POWER LEADS Input Type Mains AU/NZ 3 Pin Output Type...
In stock
+ −
Cable 15 pol ST/BU 2m DB15M/F
$AU14.99
In stock
+ −
Drawer for enclosure
$AU59.00
The drawer is produced out of robust HPL and offers space for frequently used small parts. It fits perfectly into the slots in the enclosure where it...
In stock
+ −
Magnetic Pillars for Milling Bath
$AU49.00
With these five additional Magnetic Pillars especially plates with smaller sizes can be secured safely and easily in the Milling Bath. Holding...
In stock
+ −
S/2 840 Y axis Lead Screw
$AU149.00
S/2 840 Y axis Lead Screw
In stock
+ −
STEPCRAFT adaptor cable for Industrial quality HF spindle
$AU34.50
The small industrial HF spindle system uses 25pin LPT input connection to control the speed and on/off. This cable plugs directly into the STEPCRAFT...
In stock
+ −
 Prev
1 2 3
Next