CNC- Accessories

Sort by Position: Low to High
96 Per Page
4 th Axis Rotary table with three-jaw chuck
$AU899.00
With this round table, you can easily engrave rings, thread milling, etc. - Secure workpiece holder with steel three-jaw chuck. - Zero point defined...
In stock
+ −
Hot-knife for Step Craft CNC-/3D-Systeme
$AU229.00
The hot-cutter  for the STEPCRAFT 300 or 420. The tool enables precise cutting of all materials like styrofoam, expandable polystyrene (EPS) or...
In stock
+ −
Drag Knife holder (Cutting depth adjustable)
$AU239.00
Here you get a knife holder for CNC machines with unique automatic pressure regulation of high-quality aluminum.  Details: - Kniffe holder (Cutting...
In stock
+ −
Stepcraft CNC Pen
$AU99.00
Small CNC writer for the 20mm clamping device Included 1 x Stainless steel mine black
In stock
+ −
Stepcraft Mini Engraving point
$AU29.00
The Tungsten Carbide Tip is designed for the use with the Mini Engraving Point and is easily inserted and secured.   Tungsten carbide is created from...
In stock
+ −
Adaptor Proxxon Drill Press To Dremel. Ryobi, Ozito
$AU29.00
Adapter from 20 mm clamping diameter to Dremel,Ryobi and Ozito Tool adapter for our CNC-/3D-Systems: Ø 20 mm to M19x2 thread (Dremel).
In stock
+ −
Tool adapter from Ø 20 mm to Ø 8 mm for mini tools
$AU19.95
Tool adapter for our CNC-/3D-systems: From Ø 20 mm to Ø 8 mm to use with CNC pen Vario or the engraving point.
In stock
+ −
Save 6%
Tool adapter from Ø 43 mm to M19x2 mm thread (Dremel)
$AU39.99 $AU37.50
Tool adapter for our CNC-/3D-Systems: Diameter Ø 43 mm to M19x2 mm thread (Dremel).
In stock
+ −
Tool adapter from Ø 43 mm to Ø 20mm (Proxxon)
$AU39.00
Tool adapter for our CNC-/3D-system: Diameter Ø 43 mm to Ø 20mm (Proxxon).
In stock
+ −
Proxxon Precision steel vice PM 40
$AU95.00
Milled from steel for precision. Completely angular. Jaw width 46mm, clamping capacity 34mm. Total length 70mm. Especially suited for filigree and accurate...
In stock
+ −
Quick Release Lever
$AU16.99
The clamping lever with disengaging knob is a suggestion of improvement of one of our customers. The lever is very goog suitable for quick release of the...
In stock
+ −
Save 20%
T-Slot Machine Table for D600
$AU999.00 $AU799.00
The machine table from aluminium for your STEPCRAFT! The t-slot plate is made of low-tension aluminium and is well-suited for clamping workpieces of...
In stock
+ −
UC100 USB motion controller
$AU199.00
Replaces the LPT port. - Controls upto 6-axis simulteneously. - Works with Mach3 software via plugin. - Upto 100kHz operation. - USB connection...
In stock
+ −
Adapter 90 degree clamping 20mm
$AU69.00
Tool adapter for our CNC-/3D-system: With the aid of the adapter larger workpieces can be processed from the side. Diameter Ø 43 mm to Ø 20mm...
In stock
+ −
ER11 collets
$AU16.99
You Choose what size you need ( 1 COLLET = $16.99 EACH ) 3.0mm,4.0mm,6.0mm,,8mm  1/8", 1/4" if you choose to buy the set...
In stock
Select options
Parallel-Module
$AU49.00
Parallel-module to connect the mainboard of the STEPCRAFT 300 / 420 / 600 to a parallel interface (LPT1) of your computer.
In stock
+ −
STEPCRAFT 4th axis module
$AU189.00
The module is necessary to control a rotary axis with the STEPCRAFT machine. The module is simply plugged into the main control unit and can be used for...
In stock
+ −
Tailstock suitable for rotary table
$AU189.00
Tailstock, specially designed for circular-table, Complete with all screws. Technical data: - peak hight: 32 mm - total height: 45 mm - screw...
In stock
+ −
Save 10%
STEPCRAFT T-Slot Machine Table for S300
$AU499.00 $AU449.00
The machine table from aluminium for your STEPCRAFT! The t-slot plate is made of low-tension aluminium and is well-suited for clamping workpieces of...
In stock
+ −
Save 12%
T-Slot Machine Table for D420
$AU679.00 $AU599.00
The machine table from aluminium for your STEPCRAFT! The t-slot plate is made of low-tension aluminium and is well-suited for clamping workpieces of...
In stock
+ −
Tool adapter from Ø 43 mm to Ø 33 mm
$AU39.00
Tool adapter for our CNC-/3D-systems: Ø 43 mm to Ø 33 mm.
In stock
+ −
20mm CNC Guide Support
$AU7.99
 to mount your Dremel all you need to add is one of these 
In stock
+ −
Precision vise, large (suit PF/FF 230, PF/FF 400)
$AU146.00
Milled from steel, this high accuracy vise may be used on its side or on its back. Technical specifications 60mm jaw width 44mm maximum clamping capacity...
In stock
+ −
Free shipping
UCCNC software license (key!)
$AU99.00
UCCNC is a machine control software. It uses and external hardware to generate signals to produce coordinated motion on up to 6 machine axis. The external...
In stock
+ −
Heating Bed 200 x 200mm
$AU379.00
The heating bed makes 3D print much easier and more accurate. It reduces the temperature between the filament and the bed and, which provides a better adhesion. Additionally, the heating bed is height-adjustable so that you will always have a plane surface.
In stock
+ −
Woodburning Pen
$AU179.00
The woodburning pen enables you to easily engrave wood by burning amazing designs into the material. The device heats up to 550°C and offers various tips...
In stock
+ −
Spindle Mount 69mm for DeWalt
$AU59.00
This spindle mount is more stable and capable for spindles and routers with a 69 mm collar like the DeWalt DW610.
In stock
+ −
Tool holder for automatic tool changer
$AU69.00
The tool holders have a high concentricity due to the direct clamping system. They are made of stainless steel and available in the shaft diameters of...
In stock
Select options
MICROLUBE GL 261 Kleber (Grease)
$AU9.99
c Klüber is a special grease based on mineral oil with a special lithium soap . It contains the active ingredient combination MICROLUBE . This causes a...
In stock
+ −
Set of 6 Tee Nuts for Stepcraft , MF 70 - KT 70 - GE 70 - GE 20 - MF 70/CNC
$AU11.99
Set of six steel tee nuts compatible with the tee slots of the below Stepcraft and Proxxon™ devices: Stepcraft T-slot Tables MF 70 mill # 27110...
In stock
+ −
Stepcraft Milling bath 420 (150 x 350 mm)
$AU299.00
When using the Milling Bath you can machine various materials under water or other liquids. Thus, you do not only achieve a very good cooling, which is...
In stock
+ −
Stepcraft Milling bath 600 (350 x 550 mm)
$AU429.00
When using the Milling Bath you can machine various materials under water or other liquids. Thus, you do not only achieve a very good cooling, which is...
In stock
+ −
Stepcraft Milling bath 840 (550 x 700 mm)
$AU569.00
When using the Milling Bath you can machine various materials under water or other liquids. Thus, you do not only achieve a very good cooling, which is...
In stock
+ −
Save 8%
Clamping Nut (spare part) for HF spindle
$AU19.50 $AU17.95
Clamping nut (spare part) for STEPCRAFT HF-spindle 350 / 500 W with diameters from 1 mm to 8 mm
In stock
+ −
Save 13%
T-Slot Machine Table for D840
$AU1,499.00 $AU1,299.00
The aluminum machine table for your STEPCRAFT 2 series! The T-Slot Machine Table is made of low-tension aluminium and is well-suited for clamping workpieces...
In stock
+ −
Proxxon Step clamp set, small
$AU41.50
This set contains two stepped blocks and clamps, (11.5mm x 11mm x 4mm) Included components 2 x stepped blocks 2 x clamps 2 x T-slot nuts 2 x...
In stock
+ −
Proxxon , Stepcraft Clamping Set
$AU129.00
Flexible clamping when working with thick materials Suitable for workpieces with a thickness of up to 80 mm System based on M6 threads Clamping...
In stock
+ −
Save 6%
3D Touch Probe
$AU529.00 $AU499.00
  The Touch Probe device was designed to expand the capabilities of the Stepcraft CNC System by allowing you to be able to precisely locate starting...
In stock
+ −
Save 23%
Suspended workpiece holder
$AU129.00 $AU99.00
The Clamping Set enhances your flexibility when securing your workpiece to the T-slot machine table of your Desktop 3D System. Due to the step blocks,...
In stock
+ −
Laser Engraving Head DL445 3 Watt
$AU1,449.00
Some jobs are best suited for a laser rather than a rotary tool.  The new Stepcraft Laser Engraving Head allows for a contactless cutting cutting of light...
In stock
+ −
Save 11%
(915mm) Double T-slot Track
$AU28.00 $AU25.00
Veritas' double T-Slot tracks are the perfect jig-making alternative when you cannot install a regular extrusion using glue or screws. Available in 2'...
In stock
+ −
LED-Illumination
$AU119.00
The machine illumination is an indispensable auxiliary tool when you want to operate safely and precisely. For this purpose, the self-adhesive LED strip is...
In stock
+ −
3pin Mains Plug to IEC C13 Female - 1.8m
$AU8.99
• 1.8 metres long • Earthed • SAA approved POWER LEADS Input Type Mains AU/NZ 3 Pin Output Type...
In stock
+ −
Cable 15 pol ST/BU 2m DB15M/F
$AU14.99
In stock
+ −
Drawer for enclosure
$AU59.00
The drawer is produced out of robust HPL and offers space for frequently used small parts. It fits perfectly into the slots in the enclosure where it...
In stock
+ −
Magnetic Pillars for Milling Bath
$AU49.00
With these five additional Magnetic Pillars especially plates with smaller sizes can be secured safely and easily in the Milling Bath. Holding...
In stock
+ −
S/2 840 Y axis Lead Screw
$AU149.00
S/2 840 Y axis Lead Screw
In stock
+ −
STEPCRAFT adaptor cable for Industrial quality HF spindle
$AU34.50
The small industrial HF spindle system uses 25pin LPT input connection to control the speed and on/off. This cable plugs directly into the STEPCRAFT...
In stock
+ −
Save 17%
5 Piece Metric Hex Ball Driver Set w/holder
$AU29.99 $AU24.95
This is a 5 pc Set that includes a handy workbench or fieldbox holder for the Ball Wrenches. The perfect tools for getting at those hard to reach places....
In stock
+ −
CNC Milling for Makers
$AU69.00
  Until fairly recently, machining has been a high-cost manufacturing technique available only to large corporations and specialist machine shops....
In stock
+ −
The CAD, CAM & CNC Workbook
$AU69.00
  The CAD, CAM & CNC Workbook   is a modulary structured textbook adressing to the self-educated and teachers for the lower and...
In stock
+ −
Stepcraft Extension cord for HF-spindle
$AU59.00
The HF-spindle comes with a 2 m connection cable between HF-spindle and control unit. With the extention cord the connection cable can be lengthen to...
In stock
Select options
Tool Holder - Part #3 In Manual
$AU29.99
This spindle mount is more stable and capable for spindles and routers with a 43mm
In stock
+ −
Tool Tray Large
$AU149.00
The tool tray serves as functional and tidy depot for the different tools and is available in two sizes. The big size offers place for up to seven...
In stock
+ −
Tool Tray Small
$AU99.00
The tool tray serves as functional and tidy depot for the different tools and is available in two sizes. The big size offers place for up to seven...
In stock
+ −
Logitech Wireless Mouse Grey M185
$AU19.99
A simple, reliable mouse with plug and play wireless
In stock
+ −
Donek Drag Knife
$AU449.00
Compare Drag Knife Models D1 & D3 Drag Knife for CNC Routers Our D1 & D3 Drag...
In stock
Select options
Tool Holder for ATC AMB
$AU99.00
The tool holder with a size comparable to SK15 comes with a clamping nut and fits into the KRESS tool changer. Collets with a size of ER11 can be used with...
In stock
+ −
2nd Layer Module
$AU79.00
The 2nd Layer Module extends the connection possibilities of the Switch-Box. Three more tools can be connected to the Switch-Box, so the device can operate...
In stock
+ −
UC400ETH ethernet motion controller
$AU259.00
The UC400ETH is a motion controller with Ethernet interface specifically for use with  UCCNC  motion control software and or MACH3.. The device can...
In stock
+ −
Brush holder for vacuum adapter for HF/Kress/MM-1000
$AU29.00
brush holder for vacuum adapter for HF/Kress/MM-1000
In stock
+ −
IDC26-DSUB25 female ribbon cable assembly L=250mm (to use with the UC300-5LPT)
$AU9.90
In stock
+ −
Save 17%
High Quality Precision Collet SET ER20 (1‐13mm +1/8" & 1/4" 15pcs)
$AU240.80 $AU199.00
High Quality Precision Collet SET ER20 (1‐13mm 15pcs) Includes:1/2/3/4/5/6/7/8/9/10/11/12/13mm & 1/8" & 1/4" Run Out ≤ 0.008mm
In stock
+ −
High Quality Precision Collet ER20 (Run Out ≤ 0.008mm)
$AU14.99
you choose what size you need,( price per collet) High Quality Precision Collets ER20 1,2,3,4,5,6,7,8,9,10,11,12,13mm & 1/8" & 1/4" Run Out...
In stock
Select options
3D Printing Head PH-40
$AU1,279.00
With the 3D Print Head PH-40 you can create high quality 3D models layer by layer. The variable temperature control makes it possible to use all filaments...
In stock
+ −
UC400ETH ethernet motion controller enclosed with 12v power pac
$AU339.00
Complete with 12v power pac all enclosed   - Replaces 2 pieces of standard LPT ports.   - Controls upto 6-axis...
In stock
+ −
Workpiece Fan for 3D Print Head PH-40
$AU79.00
The Workpiece Fan cools down the filament immediately after printing. Thus, small, peaked areas, e. g. spires, can be printed reliably. The workpiece fan...
In stock
+ −
Connecting cable for heating bed and print head PH-40
$AU39.00
Connecting cable for heating bed and print head PH-40
In stock
+ −
Cable and Vac hose tidy
$AU16.99
Cable and Vac hose tidy (3d Printed)  
In stock
+ −
HorizontalToggle Clamp D-Series small
$AU94.00
The Horizontal Toggle Clamp allows the variable, tool-free clamping of various workpieces. For this purpose it is attached to the T-slot table of the...
In stock
+ −
Horizontal Toggle Clamp D-Series large
$AU99.00
The Horizontal Toggle Clamp allows the variable, tool-free clamping of various workpieces. For this purpose it is attached to the T-slot table of the...
In stock
+ −
AXBB-E ethernet motion controller and breakout board combined controller
$AU329.00
The AXBB-E is a CNC Motion Controller and breakout board combination with Ethernet interface. The device can communicate with a connection to the control...
In stock
+ −
AMB D Milling Motor 1050 FME-P Portal 230V with external speed control for D-Series
$AU1,099.00
The AMB 1050 FME-1 DI is a powerful milling motor with 1050 W. The milling motor is designed extremely robust and is, thus, suited for milling works in a...
In stock
+ −
UCR201 wireless CNC jog pendant
$AU399.00
The UCR201 wireless jog pendant was designed to be used with the UCCNC software. The product is built from 2 main parts, one part is the jog pendant...
In stock
+ −
Save 11%
Performance Kit 840
$AU898.00 $AU798.00
The Performance Kit has been designed for all those who want to upgrade their 2nd generation D-Series with a feature of the Q-Series. The new mainboard can...
In stock
+ −
Save 11%
Performance Kit 600
$AU898.00 $AU798.00
The Performance Kit has been designed for all those who want to upgrade their 2nd generation D-Series with a feature of the Q-Series. The new mainboard can...
In stock
+ −
Save 11%
Performance Kit 420
$AU898.00 $AU798.00
The Performance Kit has been designed for all those who want to upgrade their 2nd generation D-Series with a feature of the Q-Series. The new mainboard can...
In stock
+ −
Save 11%
Performance Kit 300
$AU898.00 $AU798.00
The Performance Kit has been designed for all those who want to upgrade their 2nd generation D-Series with a feature of the Q-Series. The new mainboard can...
In stock
+ −
HOSE T/S 50/60L VACS 38MM X 3.5M
$AU39.00
In stock
+ −
Replacement Grease 50ml (Switzerland)
$AU9.99
Tub 50ml Ultimate performance long life grease for optimum lubrication. Maximum adhesion and total resistance. Optimum protection against...
In stock
+ −
450 nm Laser Safety Goggles
$AU99.00
These laser glasses can help reduce the probability of light entering the user’s eye from a diffusely backscattered laser light. This product is OD 7+ over...
In stock
+ −
High Quality Precision Collet ER16
$AU24.00
you choose what size you need,( price per collet) These collets are high precision collets with a max run-out of 0.008mm. These collets are used for the...
In stock
Select options
Enclosure Safety kit
$AU699.00
In stock
+ −
USB cable 1.8m, A/mini B (for UC100 motion conroller)
$AU9.95
USB cable 1.8m, A/mini B (for UC100 motion conroller)
In stock
+ −
IDC26-DSUB25 male ribbon cable assembly L=250mm (to connect the UC100 to HDBB2)
$AU9.90
In stock
+ −
IDC26-IDC26 ribbon cable assembly L=250mm (to connect the UC300-5LPT to HDBB2 breakout board)
$AU8.80
In stock
+ −
StepcraftMilling Motor MM-1000 DI (EU)
$AU949.00
A milling motor has to reliably produce high precision results. The MM-1000 DI is a milling spindle "made in Germany" that is manufactured under...
In stock
Select options
AMB Milling Motor 1400 FME-P DI for D- and M-Series
$AU1,199.00
A milling motor has to reliably produce high precision results. The AMB 1400 FME-P DI is a milling spindle "made in Germany" that is manufactured under...
In stock
+ −
Noise Filters Ferrite 5mm
$AU2.00
In stock
+ −
Save 33%
Goobay 50541 D-SUB 25-pin Extension Cable, Male/Female, Serial 1:1
$AU29.99 $AU19.99
Goobay 50541 D-SUB 25-pin Extension Cable, Male/Female, Serial 1:1 Connection, type D-SUB/IEEE 1284 male Connection 2, type D-SUB/IEEE 1284...
In stock
+ −
Switch-Box (incl. Tool Changer Modul)
$AU308.00
The Switch Box makes it easier to work with  multiple system-held attachments, like the ATC, 3D Printer, HF Spindle or DL445 Laser because you no longer...
In stock
+ −
Tool Magazine For Kress/MM1000 Tool Changer System (SK15, 6 Slot)
$AU89.00
In stock
+ −
Diamond Tip for Mini Engraving Point
$AU64.50
The diamond tip is the perfect choice for engraving harder materials such as glass or hard metal. It is designed for the use with the Mini Engraving Point...
In stock
+ −
Mini Engraving Point
$AU129.00
The CNC Engraving Point has been especially developed to illustrate even the smallest details in excellent quality. It can be applied to various materials...
In stock
+ −
DB25 M/M Gender Changer
$AU9.95
25-pin Male to 25-pin Male The inexpensive way to join cables together
In stock
+ −
Downholder Adapter OTK-3
$AU99.00
The Downholder Adapter for the OTK-3 allows the cutting of light, thin materials as it prevents lifting during the cutting process. Thanks to the...
In stock
+ −
 Prev
1 2
Next