CNC- Accessories

Sort Alphabetically: A to Z
48 Per Page
Horizontal Toggle Clamp D-Series large
$AU99.00
The Horizontal Toggle Clamp allows the variable, tool-free clamping of various workpieces. For this purpose it is attached to the T-slot table of the...
In stock
+ −
HorizontalToggle Clamp D-Series small
$AU94.00
The Horizontal Toggle Clamp allows the variable, tool-free clamping of various workpieces. For this purpose it is attached to the T-slot table of the...
In stock
+ −
HOSE T/S 50/60L VACS 38MM X 3.5M
$AU39.00
In stock
+ −
Hot-knife for Step Craft CNC-/3D-Systeme
$AU229.00
The hot-cutter  for the STEPCRAFT 300 or 420. The tool enables precise cutting of all materials like styrofoam, expandable polystyrene (EPS) or...
In stock
+ −
IDC26-DSUB25 female ribbon cable assembly L=250mm (to use with the UC300-5LPT)
$AU9.90
In stock
+ −
IDC26-DSUB25 male ribbon cable assembly L=250mm (to connect the UC100 to HDBB2)
$AU9.90
In stock
+ −
IDC26-IDC26 ribbon cable assembly L=250mm (to connect the UC300-5LPT to HDBB2 breakout board)
$AU8.80
In stock
+ −
Industrial quality small HF spindle for stepcraft, with VFD and adaptor cable
$AU2,999.00
ndustrial quality HF spindle system that will run on an LPT connector to control the on/off and spindle speed functionality. This spindle can be controlled...
In stock
+ −
Laser Engraving Head DL445 3 Watt
$AU1,449.00
Some jobs are best suited for a laser rather than a rotary tool.  The new Stepcraft Laser Engraving Head allows for a contactless cutting cutting of light...
In stock
+ −
LED LIGHT KIT FOR M.1000
$AU149.00
The machine illumination is an indispensable auxiliary tool when you want to operate safely and precisely. For this purpose, the self-adhesive LED strip is...
In stock
+ −
LED-Illumination
$AU119.00
The machine illumination is an indispensable auxiliary tool when you want to operate safely and precisely. For this purpose, the self-adhesive LED strip is...
In stock
+ −
Logitech Wireless Mouse Grey M185
$AU19.99
A simple, reliable mouse with plug and play wireless
In stock
+ −
Machine Control Circuit Board D3
$AU269.00
In stock
+ −
Machine Control Circuit Board performance kit
$AU269.00
In stock
+ −
Magnetic Pillars for Milling Bath
$AU49.00
With these five additional Magnetic Pillars especially plates with smaller sizes can be secured safely and easily in the Milling Bath. Holding...
In stock
+ −
Save 18%
Makita Mount M-series
$AU109.00 $AU89.00
In stock
+ −
MICROLUBE GL 261 Kleber (Grease)
$AU9.99
c Klüber is a special grease based on mineral oil with a special lithium soap . It contains the active ingredient combination MICROLUBE . This causes a...
In stock
+ −
Mini Engraving Point
$AU129.00
The CNC Engraving Point has been especially developed to illustrate even the smallest details in excellent quality. It can be applied to various materials...
In stock
+ −
Mist Lubrication System
$AU679.00
The DYNACUT Lubrication System MDMis a lowlow-pressure system with a coaxial spray nozzle for a fog-free coolant application. The coolant is not atomized...
In stock
+ −
Save 69%
Mounting Kit for Lubrication System M-Series
$AU129.00 $AU39.95
With the mounting kit you can comfortably attach the spray head of the lubrication system in the Z-axis T-slots of your STEPCRAFT M-Series. Thanks to the...
In stock
+ −
Save 17%
Mounting Kit Milling 43mm Spindle MM-1650 for M-Series
$AU239.00 $AU199.00
With the mounting kit you can comfortably attach the milling Motor MM-1650 DI to the Z-axis T-slots of your STEPCRAFT M-Series.   Scope of Delivery:...
In stock
+ −
Noise Filters Ferrite 5mm
$AU2.00
In stock
+ −
Parallel-Module
$AU49.00
Parallel-module to connect the mainboard of the STEPCRAFT 300 / 420 / 600 to a parallel interface (LPT1) of your computer.
In stock
+ −
Save 11%
Performance Kit 300
$AU898.00 $AU798.00
The Performance Kit has been designed for all those who want to upgrade their 2nd generation D-Series with a feature of the Q-Series. The new mainboard can...
In stock
+ −
Save 11%
Performance Kit 420
$AU898.00 $AU798.00
The Performance Kit has been designed for all those who want to upgrade their 2nd generation D-Series with a feature of the Q-Series. The new mainboard can...
In stock
+ −
Save 11%
Performance Kit 600
$AU898.00 $AU798.00
The Performance Kit has been designed for all those who want to upgrade their 2nd generation D-Series with a feature of the Q-Series. The new mainboard can...
In stock
+ −
Save 11%
Performance Kit 840
$AU898.00 $AU798.00
The Performance Kit has been designed for all those who want to upgrade their 2nd generation D-Series with a feature of the Q-Series. The new mainboard can...
In stock
+ −
PLH3D-6W-XF to PLH3D-6W-XF+ Upgrade Parts Kit
$AU69.00
PLH3D-6W-XF to PLH3D-6W-XF+ Upgrade Parts Kit allows you to upgrade your old generation XF laser head to the new generation XF+ laser head. This kit will...
In stock
+ −
Power supply 30V, 160W, R7B plug, AU
$AU119.00
Power supply for STEPCRAFT M-Series (also suitable for D-Series performance kit)
In stock
+ −
Precision vise, large (suit PF/FF 230, PF/FF 400)
$AU146.00
Milled from steel, this high accuracy vise may be used on its side or on its back. Technical specifications 60mm jaw width 44mm maximum clamping capacity...
In stock
+ −
PROXXON 'FLEX-DOT' Micro SCREWDRIVER SET - 15-Pce
$AU104.00
PRODUCT DESCRIPTION PROXXON 15 Piece Micro Screwdriver Set. Designed with electronic engineers, camera builders, watchmakers, jewellers,...
In stock
+ −
Proxxon , Stepcraft Clamping Set
$AU129.00
Flexible clamping when working with thick materials Suitable for workpieces with a thickness of up to 80 mm System based on M6 threads Clamping...
In stock
+ −
PROXXON EDGE FINDER SET
$AU57.00
PROXXON EDGE FINDER SET
In stock
+ −
Proxxon Precision steel vice PM 40
$AU95.00
Milled from steel for precision. Completely angular. Jaw width 46mm, clamping capacity 34mm. Total length 70mm. Especially suited for filigree and accurate...
In stock
+ −
Proxxon Step clamp set, small
$AU41.50
This set contains two stepped blocks and clamps, (11.5mm x 11mm x 4mm) Included components 2 x stepped blocks 2 x clamps 2 x T-slot nuts 2 x...
In stock
+ −
PROXXON Universal Milling Spindle 10,000 - 30,000rpm
$AU718.00
Universal milling system UF/E High torque even at lower speeds. 230V-operation (no additional controller needed). Variable speed pre-selection from...
In stock
+ −
Quick Release Lever
$AU16.99
The clamping lever with disengaging knob is a suggestion of improvement of one of our customers. The lever is very goog suitable for quick release of the...
In stock
+ −
Replacement Grease 50ml (Switzerland)
$AU9.99
Tub 50ml Ultimate performance long life grease for optimum lubrication. Maximum adhesion and total resistance. Optimum protection against...
In stock
+ −
S/2 840 Y axis Lead Screw
$AU149.00
S/2 840 Y axis Lead Screw
In stock
+ −
Saftey Enclosure For Stepcraft M -1000
$AU9,649.00
Small Format CNC for Schools and Institutions These enclosures are custom designed and manufactured by an engineer in Australia ,...
In stock
+ −
Set of 6 Tee Nuts for Stepcraft , MF 70 - KT 70 - GE 70 - GE 20 - MF 70/CNC
$AU11.99
Set of six steel tee nuts compatible with the tee slots of the below Stepcraft and Proxxon™ devices: Stepcraft T-slot Tables MF 70 mill # 27110...
In stock
+ −
Spindle Mount 69mm for DeWalt
$AU59.00
This spindle mount is more stable and capable for spindles and routers with a 69 mm collar like the DeWalt DW610.
In stock
+ −
Stand for Saftey Enclosure For Stepcraft M -1000
$AU1,099.00
machine not included
In stock
+ −
STEPCRAFT 4th axis module
$AU189.00
The module is necessary to control a rotary axis with the STEPCRAFT machine. The module is simply plugged into the main control unit and can be used for...
In stock
+ −
STEPCRAFT adaptor cable for Industrial quality HF spindle
$AU34.50
The small industrial HF spindle system uses 25pin LPT input connection to control the speed and on/off. This cable plugs directly into the STEPCRAFT...
In stock
+ −
Stepcraft CNC Pen
$AU99.00
Small CNC writer for the 20mm clamping device Included 1 x Stainless steel mine black
In stock
+ −
Stepcraft Extension cord for HF-spindle
$AU59.00
The HF-spindle comes with a 2 m connection cable between HF-spindle and control unit. With the extention cord the connection cable can be lengthen to...
In stock
Select options
Save 11%
Stepcraft Heavy Duty Drag Knife
$AU449.00 $AU399.00
The Heavy Duty Drag Knife is the robust utility knife for your CNC machine – fast, strong and precise! It is easily clamped into the 8...
In stock
+ −
 Prev
1 2 3
Next