A spiral down cut has blades which forces chips down back into your material. This has benefits of providing a perfect top finish to any wood type especially plys and top finishes. Made of a very high tungsten carbide material, down cut bits are the a weapon of choice in anyone's arsenal. Opposite to a spiral up cut, a down cut will give you a perfect top finish but a burred bottom finish if cutting all the way through. These bits therefore are most effective for engraving & lettering rather than cutting all the way through.
Suitable for
- Wood (MDF, hardwood, ply & softwoods)
Adam’s Tips
Just like a straight flute, a down cut creates a lot of dust as opposed to chips so make sure you have appropriate ventilation or dust extraction when cutting. On the plus side, the dust gets stuck and packed back into the slot you have made and keeps your cut item in place. This has the advantage of not having to use tabs or tape to hold your material down although can add time back in with the need to deburr the bottom edge.
Characteristics
- Industrial Quality
- Through Fishtail Bottom easy dive into material
- Low wear
- Clean surfaces
Applications
- Universally applicable
- Aluminium
- Plastics
- Wood
Available as ø1mm, ø2mm and ø3mm
- Supplied with all components necessary for operation
- Integrated modular control electronics for an easy connection to the computer via USB interface resp. via optional parallel or optional Ethernet RJ45 interface
- MDF machine table with aluminum T-slots resp. optional aluminum T-slot table
- Two different machine table heights
- Bosch Rexroth ball bearing guide
- Semi Closed Loop System™
- HIWIN® ball screws
- Flexi Guides™ to securely guide cables and tubes
- Powerful motors Nema 23 (Z-axis: 3A; X- and Y-axis: 4A)
- In-house development of STEPCRAFT aluminum profiles with innovative high rigidity X-profile (registered utility model)
- Standard Ø 43 mm tool holder enables the use of third-party devices (if necessary with adapter)
- Safety brush
- Completely removable machine table
- Freestyle Milling™
- Made in Germany
- 3 years manufacturer's warranty
- Overall Size (X,Y,Z): 1213 x 1624x 646 mm
- Working Space (X,Y,Z): 979 x 1444 x 194 mm
- Clamping Surface (X,Y): 1143 x 1550 mm
- Backlash: < 0.03 mm
- Weight: 137 kg (302.03 lbs)