Donek Drag Knife

$AU449.00
DONEK
In stock
+ −

Compare Drag Knife Models

D1 & D3 Drag Knife for CNC Routers

Our D1 & D3 Drag Knives are optimized for detailed work inthinner materials with a depth of cut from 0.010 in. to 0.0625 in. (1/16 in.) thick. Curved cuts as small as 1/16 in. radius are possible with these tools.  The D1 fits in a 1/2in collet and the D3 fits in a 1/4in collet.

D2 & D4 Drag Knife for CNC Routers

Our D2 & D4 Drag Knives can handle thicker materials from 0.010 in. up to 0.250 in. (1/4 in.) thick. Curved cuts as small as 1/8 in. radius can be made with this tool. The D2 fits in a 1/2in collet and the D4 fits in a 1/4in collet.

1/2" Drag knife for CNC Router

Our 1/2" Drag knife can handle thicker materials from 0.010 in. up to 0.50 in. (1/2 in.) thick. The 1/2" knife
fits in a 1/2in collet.

Model: D1 D2 D3 D4 1/2" Creaser
Collet Size: 1/2in 1/2in 1/4in 1/4in 1/2in NA
Maximum Depth of Cut: 1/16in 1/4in 1/16in 1/4in 1/2in NA
Minimum Cut Radius: 1/16in 1/8in* 1/16in 1/8in* 4.25″ NA
Approximate** Offset Value: 0.065in
(1.65mm)		 0.16in
(4.0mm)		 0.065in
(1.65mm)		 0.16in
(4.0mm)		 .25 in
(6.39mm)		 0.8in
(20.3mm)

* If you are cutting material thicker than 1/8in, the minimum cut radius on the D2 or D4 increases to the material thickness

** Offset values are approximate because results may vary from machine to machine and material to material. In general, if your blade is overturning at corners, reduce the offset. If it is under turning, increase the offset.

Patent Pending

  • Supplied with all components necessary for operation 
  • Integrated modular control electronics for an easy connection to the computer via USB interface resp. via optional parallel or optional Ethernet RJ45 interface
  • MDF machine table with aluminum T-slots resp. optional aluminum T-slot table
  • Two different machine table heights
  • Bosch Rexroth ball bearing guide 
  • Semi Closed Loop System™
  • HIWIN® ball screws 
  • Flexi Guides™ to securely guide cables and tubes 
  • Powerful motors Nema 23 (Z-axis: 3A; X- and Y-axis: 4A)
  • In-house development of STEPCRAFT aluminum profiles with innovative high rigidity X-profile (registered utility model)
  • Standard Ø 43 mm tool holder enables the use of third-party devices (if necessary with adapter) 
  • Safety brush
  • Completely removable machine table
  • Freestyle Milling™
  • Made in Germany
  • 3 years manufacturer's warranty 
  • Overall Size (X,Y,Z): 1213 x 1624x 646 mm
  • Working Space (X,Y,Z): 979 x 1444 x 194 mm
  • Clamping Surface (X,Y): 1143 x 1550 mm
  • Backlash: < 0.03 mm
  • Weight: 137 kg (302.03 lbs)
What’s Required Coming Soon
What's Included Coming Soon