With the Automatic Tool Changer for STEPCRAFT milling spindle MM-1000, Kress spindles type 530 FM, 800 FME, 800 FME-Q and 1050 FME-1 and AMB 800 FME a time consuming manual exchange of tools is no longer required. After once defining the parameters in the machine control software, the magazin is approached automatically. By use of compressed air, a tool is returned or a new one collected. The supplied magazine can hold up to six tools and is optionally extendable for up to twelve.
The Tool Changer can be operated with the Switch-Box. To use the Tool Changer, a compressor with minimum 9-10 bar (130 - 145 psi) is needed.
Tool holder with appropriate ER11 collets have to be purchased separately as well as the Switch Unit which is needed for operating the MM-800 / MM-1000.
Not suitable for AMB 1050-P / 1400 FME-P DI !
If you want to use the Tool Changer on your 1st generation STEPCRAFT D-Series, please contact us before buying.
Technical Specifications:
- SK 15 tool holders for ER11 collets from 1 to 8 mm
- Double ball bearing (sealed)
- Suitable for speeds up to 30.000 rpm
- Operating pressure: 8 bar
- Shaft diameter: 43 mm
- Diameter: 56 mm
- Length (without tool holder): 100 mm
- Weight: 585 g
Scope of Delivery:
- 1x Tool Changer
- 1x Magazine to hold up to 6 tools
- Wrench
Note
Saftey Reg
To Operate Auto Tool changers , All machines should be in an enclosure.
"please make sure you have protection against accidental tool ejection in your controller"
- Supplied with all components necessary for operation
- Integrated modular control electronics for an easy connection to the computer via USB interface resp. via optional parallel or optional Ethernet RJ45 interface
- MDF machine table with aluminum T-slots resp. optional aluminum T-slot table
- Two different machine table heights
- Bosch Rexroth ball bearing guide
- Semi Closed Loop System™
- HIWIN® ball screws
- Flexi Guides™ to securely guide cables and tubes
- Powerful motors Nema 23 (Z-axis: 3A; X- and Y-axis: 4A)
- In-house development of STEPCRAFT aluminum profiles with innovative high rigidity X-profile (registered utility model)
- Standard Ø 43 mm tool holder enables the use of third-party devices (if necessary with adapter)
- Safety brush
- Completely removable machine table
- Freestyle Milling™
- Made in Germany
- 3 years manufacturer's warranty
- Overall Size (X,Y,Z): 1213 x 1624x 646 mm
- Working Space (X,Y,Z): 979 x 1444 x 194 mm
- Clamping Surface (X,Y): 1143 x 1550 mm
- Backlash: < 0.03 mm
- Weight: 137 kg (302.03 lbs)