For lettering, engraving, signmaking, fluting and decorative trimming.
| Brand | Amana Tool |
| B1 | 6.35mm (1/4") |
| Cutting Height (B) | 12.7mm (1/2") |
| D1 | 0.71mm (0.028") |
| Diameter (D) | 12.7mm (1/2") |
| Flutes | 2 |
| Overall Length (L) | 50.8mm (2") |
| Radius (R) | 6.35mm (1/4") |
| Shank (d) | 6.35mm (1/4") |
| Diameter (D) | 1/2 |
|---|---|
| Radius (R) | 1/4 |
| Cutting Height (B) | 1/2 |
| Shank (d) | 1/4 |
| Overall Length (L) | 2 |
| B1 | 1/4 |
| Type | Carbide Tipped |
| Flutes | 2 |
| D1 | .028" |
For lettering, engraving, signmaking, fluting and decorative trimming.
Note: Due to very fine plunge point, bit is not guaranteed against breakage.
Vectric compatible tool file for 56123 available for download, click here.
Using the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Right hand helix right hand cut.
| Direction | Up-Cut |
|---|---|
| (D) Diameter | 1/8 |
| (B) Cutting Height | 1/2 |
| (d) Shank | 1/4 |
| Overall Length (L) | 2 |
| Flutes | 1 |
Using the highest quality sub-micrograin carbide these bits have a special proprietary edge processing system featuring a super high polished cutting edge with a unique “mirror finish” resulting in clean cuts, less chance for chip re-welding, a superior surface finish and a longer tool life. Right hand helix right hand cut.
| Direction | Up-Cut |
|---|---|
| (D) Diameter | 1/8 |
| (B) Cutting Height | 1/2 |
| (d) Shank | 1/4 |
| Overall Length (L) | 2 |
| Flutes | 1 |