Save 20%
| Diameter | Cutting Height | Shank | Overall Length | Flute | Rotation | Max RPM | Surface Coating |
|---|---|---|---|---|---|---|---|
| 3mm | 10mm | 3mm | 40mm | 3 | Upcut | 28,000 | AlTiN |
These 2, 3 and 4 flute industrial solid carbide router bits are manufactured from Amana Tool®'s exclusive ultra-fine micrograin carbide and feature a 30 degree Center Cutting Mill End, a corner chamfer (for extra strength), Up-Cut design and very importantly, the Aluminum Titanium Nitride (AlTiN) Coating.
Increase the ruggedness of your solid carbide endmill's number one major wear point by the addition of corner chamfers that enhance the edge strength.
Excellent for use in a broad range of materials including:
- Stainless Steel
- Steel
- Cast Iron
- Composites
- Low Carbon Steel
- Magnesium
- Metal Composite Material (MCM)
- Non-Ferrous Metals
- Plastics
- Super Alloys
- Titanium (up to 40HRc Hardness)
Perfect for the signmaking industry.The special carbide grade combined with the AlTiN coating gives amazing performance. The unique corner chamfer gives the bits great strength. These bits are available in several sizes. Read a woodworker's review of these bits.
AlTiN Coating Benefits:
- Extra wear resistance
- Allows for faster feed and speed rates
- Cutting edge protected from wear
- Better chip evacuation
- Less heat build up
- Superior cutting quality and extended tool life
WARNING! Inspect cut quality and adjust feed and speed accordingly. Care should be taken to observe proper feeds and speeds according to the workpiece material to avoid damage.Note: For optimal results and extended tool life use mist lubricant system or air cooling.
- Supplied with all components necessary for operation
- Integrated modular control electronics for an easy connection to the computer via USB interface resp. via optional parallel or optional Ethernet RJ45 interface
- MDF machine table with aluminum T-slots resp. optional aluminum T-slot table
- Two different machine table heights
- Bosch Rexroth ball bearing guide
- Semi Closed Loop System™
- HIWIN® ball screws
- Flexi Guides™ to securely guide cables and tubes
- Powerful motors Nema 23 (Z-axis: 3A; X- and Y-axis: 4A)
- In-house development of STEPCRAFT aluminum profiles with innovative high rigidity X-profile (registered utility model)
- Standard Ø 43 mm tool holder enables the use of third-party devices (if necessary with adapter)
- Safety brush
- Completely removable machine table
- Freestyle Milling™
- Made in Germany
- 3 years manufacturer's warranty
- Overall Size (X,Y,Z): 1213 x 1624x 646 mm
- Working Space (X,Y,Z): 979 x 1444 x 194 mm
- Clamping Surface (X,Y): 1143 x 1550 mm
- Backlash: < 0.03 mm
- Weight: 137 kg (302.03 lbs)
What’s Required Coming Soon
What's Included Coming Soon