| D Diameter |
B Cutting Height |
d Shank |
L Overall Length |
Rotation | Flute | Surface Coating |
|---|---|---|---|---|---|---|
| 6mm | 19mm | 6mm | 63mm | Upcut | 3 | Spektra |
Amana Tool®’s Modern Materials Finishing Geometry (MMFG) incorporates high shear, multi-fluting and Spektra Extreme Tool Life Coating designed for the ultimate combination of finish and tool longevity in aerospace materials. Modern-day materials present challenges to the fabricator, using Amana Tool’s special, multi-flute edge tool featuring Spektra™ coating, addresses these challenges with a winning geometry combination.
Excellent for cutting:
- Plastic
- Acrylic Stone
- Aluminum
- Acrylonitrile-Butadiene-Styrene (ABS)
- Carbon Fiber Reinforced Polymer (CFRP)
- Coroplast®*
- Corian
- Fiberglass
- Fiberglass PCB Board
- HDPE
- High Impact Polystyrene (HIPS)
- Polycarbonate (Lexan™)
- Low Density Polyethylene (LDPE)
- Phenolics
- Poly (methyl methacrylate) (PMMA)
- Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
- Thermoplastic Polyolefin (TPO)
*Coroplast® is soft plastic cardboard made with super soft, super flexible PVC.
Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™
Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant, distinctively-tinted coloring, nACo provides additional improvements in four critical aspects of router tooling.
- nACo coating is an micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Coatings prevents high heat and oxidation which is detrimental to cutting tool performance.
- Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
- nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.
- Supplied with all components necessary for operation
- Integrated modular control electronics for an easy connection to the computer via USB interface resp. via optional parallel or optional Ethernet RJ45 interface
- MDF machine table with aluminum T-slots resp. optional aluminum T-slot table
- Two different machine table heights
- Bosch Rexroth ball bearing guide
- Semi Closed Loop System™
- HIWIN® ball screws
- Flexi Guides™ to securely guide cables and tubes
- Powerful motors Nema 23 (Z-axis: 3A; X- and Y-axis: 4A)
- In-house development of STEPCRAFT aluminum profiles with innovative high rigidity X-profile (registered utility model)
- Standard Ø 43 mm tool holder enables the use of third-party devices (if necessary with adapter)
- Safety brush
- Completely removable machine table
- Freestyle Milling™
- Made in Germany
- 3 years manufacturer's warranty
- Overall Size (X,Y,Z): 1213 x 1624x 646 mm
- Working Space (X,Y,Z): 979 x 1444 x 194 mm
- Clamping Surface (X,Y): 1143 x 1550 mm
- Backlash: < 0.03 mm
- Weight: 137 kg (302.03 lbs)